Product Overview
Fischer self drill plasterboard fixing, self tapping rapid installation suitable for plasterboard and rear insulated plasterboard
- The PDM cuts into the plasterboard using a standard screwdriver, no pre-drilling is necessary
- No special tools or setting tools required
- Sharp self tapping thread enables fast and safe fixing
- Can be used with wood, self tapping and chipboard screw
- Short fixing length means little space behind the plasterboard is required
- 4.5 x 35mm screws included
Functionality
- The gypsum plasterboard fixing GK is suitable for pre-positioned installation.
- The GK is screwed flush into the gypsum plasterboard using the setting tool provided. Over tightening the fixing should be avoided. Therefore, the installation torque should be limited when using a battery operated screwdriver.
- Adapted for wood, self-tapping and chipboard screws of 4.0 to 5.0 mm diameter.
- For board thicknesses greater than 15 mm, drill a hole first by using the setting tool.
- Not suitable for gypsum fibreboard and tiled plasterboard.
